Enhanced Half-duplex Interface Chip Compatible With Traditional 485 Chip

0
91
Advertisement

Mornsun’s SCM3401A prevents excessive output current caused by fault conditions or driver short circuit. A driver current limit on the output stage provides and ensures immediate protection against short circuits over the entire common mode voltage range

Mornsun’s SCM3401A is a half-duplex enhanced transceiver designed for RS–485 data bus networks. Powered by 5V supply, the SCM3401A is fully compliant with TIA/EIA-485A standard and is suitable for data transmission of up to 1Mbps. Receivers have exceptionally high input impedance, which places only 1/8 of the standard load on a shared bus and up to 256 transceivers.

SCM3401A’s pin and performance are compatible with traditional IC, the reliability design of A, B pin is emphasized, including driver output over current protection and enhanced ESD design. The ESD protection level of A, B pin can be up to 15KV (Human Body Model).

Key Features

  • 5.0V Single Supply Operation
  • Baud Rate Up to 1Mbps
  • 1/8 Unit Load-Up to 256 Nodes on a Bus
  • Low Quiescent Power
    -0.3mA Active Mode
    -50nA Shutdown Mode
  • Bus-Pin ESD Protection Up to 15KV
  • Driver short circuit protection
Advertisement

READ
Low Voltage Start-Up Controller For 4-85V Input DC/DC Power Supply
Advertisement

SHARE YOUR THOUGHTS & COMMENTS

Please enter your comment!
Please enter your name here

Are you human? *