Cost-Effective LED Driver For Triac-Dimmable Lighting

0
814
Advertisement

Diodes Incorporated introduced an LED driver designed to fit a wide range of triac-dimmable lighting applications, especially retrofit lamps. An integrated MOSFET, which also eliminates the need for an auxiliary winding, reduces BOM cost and component count. Further, the option of three MOSFET voltage/current ratings provides design flexibility for meeting manufacturing requirements for residential lighting.

Based on buck or buck-boost topology, the AL1696 implements constant current conversion with a high power factor by operating in boundary conduction mode. This also reduces switching noise, easing EMI/EMC testing and qualification. The design only requires a single winding inductor and achieves a tight current sense tolerance of ±3 per cent.

The device features a low operating current of 120μA, with a 150μA startup current, and is compatible with a wide of leading-edge and trailing-edge dimmers, providing compliance with the NEMA SSL6 dimming curve. MOSFET options for 3A at 300V, 2A at 500V and 2A at 600V enable the AL1696 to be matched to end-market line-input voltage requirements and allow it to be used in LED lamps up to 12W.

Advertisement

The AL1696 is offered in a small outline SO-7 package that is configured with an extra pin space between the high-voltage MOSFET drain and its low-voltage pins to increase electrical isolation. The device also features internal protection for output short circuit, over-temperature, under-voltage lockout, leading-edge blanking and cycle-by-cycle over-current protection.

READ
Compact EMC Correcting Chokes Upto 10 A
Advertisement

SHARE YOUR THOUGHTS & COMMENTS

Please enter your comment!
Please enter your name here

Are you human? *