/ 

PASSWORD RESET

Are you human? *


REGISTER


Are you human? *


Making it easier for designers to create CAN-based applications, Microchip has launched new 8-bit microcontrollers (MCUs) that combine a Controller Area Network (CAN) bus with an extensive array of Core Independent Peripherals (CIPs). The MCUs are ideal for applications using CAN in the medical, industrial and automotive markets, such as motorized surgical tables, asset tracking, ultrasound machines, automated conveyors and automotive accessories.

The CIPs increase system capabilities while making it easier for designers to create CAN-based applications without the complexity of added software.

Microchip notes: “The new MCUs let system designers greatly by saving time, as it is significantly easier to configure a hardware-based peripheral, as opposed to writing and validating an entire software routine, to accomplish a task.”

“A key advantage of using a K83 MCU in CAN-based systems is that the CIPs provide a deterministic response to real-time events, shorten design time and can be easily configured through the MPLAB Code Configurator (MCC) tool”, according to the Press release.

“Being able to configure an MCU with a few clicks within MCC will change the way you design with CAN,” said Steve Drehobl, vice president of Microchip’s 8-bit MCU business unit. “The CIPs in the K83 family make it easier to use communications, intelligent analog and low-power features with the same tool set as with other PIC microcontrollers.”

The PIC18 K83 devices contain 15 time-saving CIPs including: “Cyclic Redundancy Check (CRC) with memory scan for ensuring the integrity of non-volatile memory; Direct Memory Access (DMA) enabling data transfers between memory and peripherals without CPU involvement; Windowed Watchdog Timer (WWDT) for triggering system resets; 12-bit Analog-to-Digital Converter with Computation (ADC2) for automating analog signal analysis for real-time system response; and Complementary Waveform Generator (CWG) enabling high-efficiency synchronous switching for motor control.”

READ
Bistable Power Relay Switches 4kVA In Energy Smart Apps

As development support for the new devices, Microchip offers the MPLAB Code Configurator (MCC), a free software plug-in that provides a graphical interface to configure peripherals and functions specific to your application. MCC is incorporated into Microchip’s downloadable MPLAB X Integrated Development Environment (IDE) and the cloud-based MPLAB Xpress IDE.

The MCUs are also supported by the Curiosity High Pin Count (HPC) Development Board (part #DM162136).

The PIC18F25K83 with 32 KB of Flash memory and the PIC18F26K83 with 64 KB of Flash memory are available today for sampling and in volume production in 10,000 unit quantities.

These MCUs are available in 28-pin SPDIP, SOIC, SSOP, UQFN and QFN packages.

For more information on the two new PIC18 K83 devices available, visit: www.microchip.com/k83.

To read full Press release, click here.

 

Leave A Reply

Your email address will not be published.

Are you human? *